Industrialization Engineer

2 weeks ago

Suzhou, China bioMérieux Full time

岗位设立的目的及目标 / PRIMARY PURPOSE AND OVERALL OBJECTIVE OF THE JOB

负责生物梅里埃有源仪器项目的本地化项目，为现有产品/新工艺提供技术支持或/和改进方案，并主导建立本土化仪器的组装/测试程序，产品的开发验证和支持内部/外部测试等工作，以支持本土仪器的注册和最终商业化生产。
Responsible as internal point of  reference to guaranty bioMerieux active instruments transfer project for localization, to provide technical support and /or improvement to existing products/processes, and lead to setup instruments assembly/testing procedures, validation , and internal/external testing for supporting local registration and final commercial production.  

 

主要职责 / MAIN ACCOUNTABILITIES

Safety, Health & Environment /安全，健康和安全

确保符合总部EHS方针、本地法规以及ISO14000的需求。
Ensure compliant to global EHS policy, local regulation and ISO 14000 requirements.

Quality and Regulation/质量和法规

确保遵守国家药品监督管理局相关法规、ISO 13485 标准以及其他适用行业规范，以支持完成公司目标。
Support the company’s goal of ensuring compliance with NMPA regulations, ISO 13485 standard and other industry codes applicable.

Project/项目
仪器本土化项目的项目管理和控制。包含但不限于项目计划、风险控制等工作。对接海外转移工厂的技术专家，参与项目组定期会议汇报项目进展。
Instrument localization projects management and control, including but not limited to Project plan management, Risk assessment control ,etc. In contact with sending site SMEs and report project status in regular project meeting.

转移并本地化相关组装和测试程序文件以适应中国当地的规范、法规，并符合产品技术要求和本地强制性标准。
Transfer and localize related assembly and testing procedures to adapt to China local codes or regulations, and meet product technical requirements and local mandatory standards.

主导组装和测试工艺研究和工艺验证, 方案/报告的的撰写和执行。解决仪器组装和测试过程中技术难点。
Lead Instruments assembly & testing process study & process validation  including  protocol/report writing, validation/study execution, etc. Solve technical issues during instruments assembly and testing activities.

主导仪器产品验证包含单不限于子部件验证、系统硬件/固件验证、性能验证等等，方案/报告的的撰写和执行。以支持产品注册所需的研究报告的输出。
Lead instrument product validation including but not limited to components validation, Hardware/Firmware validation, system performance validation, etc. Protocols and reports writing and execution to support product registration.

基于项目需求支持仪器的型式检验或其他验证/确认等工作。
Support instrument type testing or other qualification/verification activities per project required .

支持注册资料的撰写和整理。
Support registration dossiers writing and preparation.

支持工厂、集团质量以及监管当局的良好生产规范和ISO 9001/ISO 13485质量体系等审核活动
Supports site, corporate and competent authority quality system audit activities of GMP and ISO 13485 etc.

必要的苏州工厂出差（每月20%左右）
Necessary business trips to Suzhou factory (about 20% per month)
Routine Operation/常规运营

不断优化工艺相关程序以适应中国当地的规范或法规, 并符合产品技术要求和本地强制性标准。
Keep optimization process related procedures to adapt to China local codes or regulations, , and meet product technical requirements and local mandatory standards.

解决仪器组装和测试过程中技术难点。
Solve technical issues during instruments assembly and testing activities.

产品变更验证如产品组件本土化转换验证、产品设计变更（硬件和软件等）验证等。
Perform validation to support Instrument change , for instance, components localization validation, instrument design change (hardware and software) validation, etc.

基于需求支持仪器的定期验证/确认等工作。
Support instrument periodical qualification/verification activities per required .

主导工艺风险分析和定期回顾
Lead process risk analysis (e.g. pFMEA) and review timely.

质量事件和变更控制等并作为技术专家给与评估，并执行分配的任务。
Provide technical evaluation to support QE investigation and change control management , and to perform assigned tasks in time.

 

知识、语言和经验要求 / KNOWLEDGE, LANGUAGE AND EXPERIENCE

本科及以上学历，机械，电子，生物工程、医学工程等医疗器械相关专业，需要有至少3年以上的有源医疗器械研发或生产企业相关工作经验。
Bachelor degree or above, major in active medical devices such as mechanics, electronics, bioengineering, medical engineering, etc. and necessary to have at least 2 years of relevant work experience in active medical device R&D or production companies
语言技能：英语和中文听、说、读、写熟练，有欧美外资企业工作经验者优先。熟练操作Word和Excel等办公软件。
Language skills: Proficient in Listening , Speaking, Reading and Writing of both English & Chinese, applicants with working experience in European and American foreign-funded enterprises will be given priority, Proficient in operating office software such as Word and Excel.
了解医疗仪器产品注册法规，了解仪器产品型式检验者优先。
It will be given priority that knowing about Medical Instrument type testing and medical instrument registration regulatory 
良好的机械、电子电路故障解决能力者优先, 对仪器组装和测试有一定的动手操作能力。
It will be given priority that good capability to solve mechanical/ electronic circuit issues, and have practical operation ability for instrument assembly and testing.
具备丰富的仪器产品研发和产品验证经验者优先。
It will be given priority that candidate who  has rich experience in instrument product development and product verification.
有良好的团队合作能力。
Good Interpersonal skill and team player. 
熟悉ISO 19001, ISO 13485, ISO 14971, GMP等医疗器械及生物安全等相关的法规规范者优先。
Be familiar with relative medical device regulation and bio-security and other codes, such as ISO 19001, ISO 13485, ISO 14971 and GMP ，will be given priority

  • Product Industrialization Engineer-IGTS

    3 weeks ago

    Suzhou, China Philips Full time

    Job TitleProduct Industrialization Engineer-IGTSJob DescriptionAs a Product Industrialization Engineer within Image Guided Therapy Systems you design, change and implement a high quality, high performing production line for Medical X-ray Devices in a low volume industry. You will be working in a cross functional, global team with different...

  • Product Industrialization Engineer-IGTS

    3 weeks ago

    Suzhou, Jiangsu, China Philips Full time

    Job TitleProduct Industrialization Engineer-IGTSJob DescriptionAs a Product Industrialization Engineer within Image Guided Therapy Systems you design, change and implement a high quality, high performing production line for Medical X-ray Devices in a low volume industry. You will be working in a cross functional, global team with different...

  • Product Industrialization Engineer-IGTS

    1 month ago

    Suzhou, China Philips Full time

    Job TitleProduct Industrialization Engineer-IGTSJob DescriptionAs a Product Industrialization Engineer within Image Guided Therapy Systems you design, change and implement a high quality, high performing production line for Medical X-ray Devices in a low volume industry. You will be working in a cross functional, global team with different...

  • Technical Service Engineer, Industrial

    3 weeks ago

    Suzhou, China H.B. Fuller Full time

    H.B. Fuller is a leading global adhesives provider focusing on perfecting adhesives, sealants and other specialty chemicals across all industries throughout the world. While our products are virtually invisible, they play a vital role in ensuring the quality of modern life and we are committed to connecting what matters to solve some of the world's biggest...

  • System Industrial Engineer

    3 weeks ago

    Suzhou, China Supply Chain Resources Group Full time

    Key ResponsibilitiesExperience and familiarize with all consumer electronics manufacturing & assembly processRecommends corrective actions and implements changesIdentifies and mitigates risks; develops and implements risk mitigation plansMay manage challenging vendor relationshipsResponsible for direct communication to relevant senior stakeholdersDrive...

  • Industrialization Engineer

    2 weeks ago

    Suzhou, China bioMerieux SA Career Site - MULTI-LINGUAL Full time

    岗位设立的目的及目标 / PRIMARY PURPOSE AND OVERALL OBJECTIVE OF THE...

  • Industrialization Engineer

    2 weeks ago

    Suzhou, Jiangsu, China bioMerieux SA Career Site - MULTI-LINGUAL Full time

    岗位设立的目的及目标 / PRIMARY PURPOSE AND OVERALL OBJECTIVE OF THE...

  • Product Industrialization Project Manager

    7 hours ago

    Suzhou, Jiangsu, China Philips Full time

    Job TitleProduct Industrialization Project ManagerJob DescriptionProduct Industrialization Project ManagerYou will focus on Product Industrialization. Enhancing operational efficiency, quality, and lead-time, while developing long-term plans to meet business expectations. Key responsibilities include implementing Design for Manufacturing (DFM)/Design for...

  • Product Industrialization Project Manager

    14 hours ago

    Suzhou, China Philips Full time

    Job TitleProduct Industrialization Project ManagerJob DescriptionProduct Industrialization Project ManagerYou will focus on Product Industrialization. Driving operational finesse, efficiency, availability, quality and lead-time and developing long-term plans to support business expectations. Other key areas are building Design for Manufacturing (DFM)/ Design...

  • Product and Process Industrialization

    3 weeks ago

    Suzhou, China Continental Full time

    职位描述 Financial Management prepare, review and manage the budget and forecast of product and process industrialization cost centers ensure timely submission of financial data to controlling implement and conduct activities according to the budget established ensure that the financial goals are met Product Industrialization Management...

  • Industrial Program Manager Level 3

    5 days ago

    Suzhou, China Faurecia Full time

    Job Description Job Responsiblities 主要工作职责： Industrial and process development Responsible for the work packages execution for the Industrial Development of the Program at the Plant: industrial footprint, Plant equipment selection (new / reuse / share), Plant layout, MIFD / MIFA, industrial trials … Responsible for the launch...

  • Product Safety Certifier

    3 weeks ago

    Suzhou, China CSA Group Full time

    Employment Status: Regular Time Type: Full time BUILDING A WORLD CLASS TEAM STARTS WITH YOU At the heart of CSA Group is a vision: making the world a better, safer, more sustainable place. It's been part of our mission for nearly one hundred years: from the first engineering standard for railway bridges developed in 1919, to more than 3,500...

  • Sr. Process Engineering Engineer

    3 weeks ago

    Suzhou, China Wacker Full time

    Our world needs ideas! As one of the world’s most research-intensive chemical companies, we have been developing leading solutions for numerous sectors – from construction to photovoltaics and cosmetics to rubber – for over years. We have a global presence with production sites on three continents and 14, employees from 70 nations. At our site in...

  • Product Safety Certifier

    3 weeks ago

    Suzhou, China CSA Group Full time

    Statut d'emploi: Regular Type d'heures: Full time Nous avons besoin de vous pour former une équipe de calibre mondial Les activités du Groupe CSA reposent sur l’atteinte d’un idéal : rendre le monde meilleur, plus sûr et plus durable.Cet ideal est au coeur de notre mission depuis 1919, année où nous avons élaboré notre première norme...

  • Product Engineer

    3 weeks ago

    Suzhou, China Atlas Copco Full time

    .fit_to_content{width:%;height:auto}Our solutions are a key part of most industries - electronics, medical research, renewable energy, food production, infrastructure and many more. Working with us means working with the latest technologies and groundbreaking, sustainable innovations.Join us on our journey for a better tomorrow.Your Role As Mechanical...

  • Product Engineer.

    2 weeks ago

    Suzhou, China ZF Group Full time

    Your tasks Be responsible for developing product for APAC. (Drawing checking/sample measurement/test &validation/release documents preparation/PEDA release in PIMS system). Be capable to understand ZF technical specification and make sure ZF requirements are strictly followed. Follow up the completion of corrective actions. Tracking project...

  • Requirements Engineer

    3 weeks ago

    Suzhou, China Continental Full time

    职位描述 As System Engineer you are responsible to support the system development for electronic air suspension systems. You are mainly reporting to different customer system project managers and work with different engineering disciplines (System, SW, Function, Electronics). You will be responsible for the customer requirements engineering process...

  • ME Engineer.

    7 days ago

    Suzhou, China ZF Group Full time

    Your tasks Responsible for manufacturing processes. Feasibility study of new project and Quotation for potential new project. CT study and Capacity study,  New investment application, responsible for specification of new equipment, fixture, tooling and acceptance. Create process documentation Process Flow Chart, PFMEA, working Instructions,...

  • Advanced Mechanical Engineer

    1 month ago

    Suzhou, China Philips Full time

    Job TitleAdvanced Mechanical EngineerJob DescriptionJob title:Advanced Mechanical Engineer- MR Purpose:You are responsible for designing and developing detailed mechanical parts for coils, including the whole system coil housing, coil connection. Principal Accountabilities: Design and develop detailed mechanical designs for MRI RF coils to full product...

  • Advanced Mechanical Engineer

    3 weeks ago

    Suzhou, Jiangsu, China Philips Full time

    Job TitleAdvanced Mechanical EngineerJob DescriptionJob title:Advanced Mechanical Engineer- MR Purpose:You are responsible for designing and developing detailed mechanical parts for coils, including the whole system coil housing, coil connection. Principal Accountabilities: Design and develop detailed mechanical designs for MRI RF coils to full product...